Advance J2U120 Industrial Transmission

Advance J2U120 Industrial Transmission has a Power of 120 kW @ 1000 RPM.

Advance J2U120 Industrial Transmission is mainly used for angle drive, planetary drive, high speed drive condition.

All of our Advance Industrial Transmission Series Gearboxes can provide CCS classification certificate, some of series can provide international classifications with extra costs which mainly including French BV, British LR, American ABS, Japanese NK , Norway DNV-GL, Russia RS, South Korea KR, Italy RINA and other classification societies.

Advantages of Advance J2U120 Industrial Transmission

Gearbox novel structure, so that its use becomes very reliable. The excellent design makes the gearbox and engine arrangement more soft and smooth.
It can be matched with high-speed diesel engines at home and abroad, and can be arranged in vertical, horizontal and inclination according to the needs of users.
Compact structure, small size, light weight and good operability. The convenience of use and maintenance is fully considered in the design.
The gearbox have adapted to combined design, and all running parts have been carefully designed and machined to the highest standards for less wasted fuel, smooth operation which can be fitted to most engine models.
With excellent machine performance, good design effectively reduce the noise, reduce the vibration，better deceleration effect and bearing propeller thrust.
Professional gearbox specialists and after-sales service, spare parts directly available from stock.

Technical Specifications

Gearbox Model:LB	LB40
Maximum input speed:	2800 RPM
Power:	40 kW @ 2800 RPM
Trans.Capacity:	0.278-0.625 kW / RPM
Rated Input Torque:	75N•m
fully loaded:	2.8t
Lead Time:	15-30 Working Days
Payment Terms:	T/T ,L/C

Item	Parameters
Maximum input power	40kW
Rated input torque	75N•m
Maximum input speed	2800 r/min
Maximum cutting width	2m
Full load	2.8t
Supported HST displacement	28L
Input gear ratio Transmission ratio 26:14 18.566；25.196；35.586 25:15 16.622；22.612；31.936 24:16 14.996；20.352；28.743 23:17 13.526；18.357；25.925

Advantages of J2U120 Industrial Transmission

Gearbox Model:	J2U120
Power:	120 kW @ 1000 RPM

Coming soon

Engine Model	Power	Engine Model	Power
HCK150	2400 kW @ 2100 RPM	J2U120	120 kW @ 1000 RPM
J110/Z110	110 kW @ 10000 RPM	JX05	5 kW @ 2000 RPM
PJ30/1500	3 kW @ 960 RPM	HCJ90	1450 kW @ 2600 RPM
2LU450	1000 kW @ 1500 RPM	FZ32	320 kW @ 1800 RPM
HCL320Z	0.16 kW/RPM	XJ22	75 kW @ 2500 RPM
2GWH100	40-60 kW @ 1500 RPM	2LH800	2450 kW @ 1500 RPM
HCT602P	441 kW @ 1200 RPM	BJ15/17	1275 Nm @ 4600 RPM
QD135	0.135HP/RPM
——END——

1. The Marine gearbox has the function of reverse, clutch, deceleration and the thrust of the propeller, which is equipped with the main engine to form the Marine power unit.
2. The “transfer capacity” refers to the ratio of the engine’s rated power to the rated speed, and the reduction ratio corresponds to the transmission capacity, which should be less than the number be offered.
3. The gearbox and engine shafting are not allowed to use rigid connection, and the bracket is recommended to be installed on the same rigid support.If the engine is mounted on the elastic support, and the gearbox is installed on the rigid support, please contact the technical department of the company to select the suitable high elastic coupling.
4. The weight of the gearbox is approximation, for different reduction ratio the weight is different.
5. Due to the technical improvement of the products, the products may change without notice. For any other questions please contact our sales engineer.

ANGLE OF TILT
Name	Transverse Direction		Longitudinal Direction
	Heeling	Rolling	Heeling	Rolling
Marine Gearbox	15°	22.5°	5°	7.5°
——END——

Marine Gearboxs Conventional wearing parts
External disc	Internal disc	Sealing	Piston ring
Gasket	Rubber sealing	Thrust plate	Filter
Coil type filter	Packing	O ring	Input shaft assembly
Transmission shaft assemby	Output shaft assembly	Hydraulic control system
——END——